Tempest PWM ARGB 120mmx120mm Fan

A Tempest Fan 120mm ARGB PWM It is a 120mm fan with a 4-pin PWM connector and a 3-pin 5v A-RGB connector, with a dual A-RGB LED lighting system that will add the finishing touch to your setup. It is designed with 7 curved blades that increase airflow with good pressure and low noise to optimize your PC's cooling.

Characteristics

• Light up your SETUP. Thanks to its dual A-RGB lighting system with a standard 3-pin 5v connection, which makes it compatible with any A-RGB device on the market with this connector, both the fan and the outer ring of the fan will light up, adding an advantage of lighting for your setup.
• Control in your hands. Tempest 120mm ARGB Fan includes a 4-pin PWM connector to allow you to adjust the fan speed and power depending on your needs to make it quieter when browsing or gaming and to deliver maximum performance when you need it. It adapts to any situation, cooling your PC as much as possible.
• Power by design. Its design with 7 curved blades was designed to distribute the greatest amount of air flow possible per minute in each turn, thus achieving a great cooling capacity, reaching 30.19 CFM of flow with a static pressure of 0.92mmH2O.
• You won't notice that he's following you. All its design added to its power management capacity means that, even at maximum power, the Tempest Fan manages to go completely unnoticed with a maximum noise level of 21.8 dbA, so that nothing disturbs you and you can just concentrate on what's important.

Tempest R Fan Specifications

• Model: Tempest Fan R 120mm ARGB PWM
• Dimensions: 120mm x 120mm x 25mm
• Maximum speed (RPM): 1360 RPM ± 15%
• Airflow (Airflow): 30.19 CFM ± 10% (MAX)
• Static pressure: 0.92mm H2O ± 10%
• Noise generated: 21.8 dB(A)±10%
• Bearing Type: Hydraulic Bearings
• Estimated useful life: 100,000 h @ 25Cº
• Voltage: 12V 0.2A ±20%
• connectors
  • 1 x 3-pin 5v ARGB connector
  • 1 x 12V 4-pin connector
• Content
  • 1 x Tempest R 120mm ARGB PWM Fan
  • 4 x screws for installation